Fluke Biomedical medTester 5000C - Manual (Page 82)

medTester 5000C
Operators Manual
5-12
This prompt appears only if you enable the prompt in the CUSTOM menu. See
Chapter 6, Customize Your medTester 5000C, for information about turning
autosequence prompts on and off. If you choose to print a test tag, the
following fields print if you have them turned on:
•
Header—The current active header (e.g. Hospital or service
business name)
•
Control #
•
Date
•
Next test due date
•
Op (operator) code
Storing An Autosequence Record
After the autosequence is finished, the medTester prompts you to store the
test record to memory and/or to print the record. Record storage is available
if you have a Memory Module option installed.
Note
Storing and printing prompts can be turned off for automatic
record storage. See Customizing your Autoseqence Prompts in
Chapter 6.
FINISHED, STORE RECORD TO:
MEMORY
F2
PRINTER
F1
QUIT
F5