Fluke Biomedical medTester 5000C - Manual (Page 19)

Biomedical Test System
General Information
1
1-7
Checklists are complete sets of preventive maintenance procedures for
equipment testing. They can contain prompts to the medTester 5000C user to
make physical inspections of the EUT and to take individual safety
measurements. A checklist can include one or more safety and performance
autosequences that automatically execute. Checklist test record data is then
uploaded to the user’s equipment management database program,
Computerized Maintenance Management System. See Chapter 11, medCheck
Module, for more information.
medTester 5000C Optional Modules
The medTester 5000C offers several modules as options. (See the table later
in this chapter.) If your medTester 5000C includes any of these modules, they
are listed under the
UTIL menu. To access the menu, do the following:
Enter these menu commands:
1. From the main menu, press:
UTIL
F5
2. Press the right arrow to scroll to the remaining menus.
3. Press:
MODULES
F3
NOTE
For further information about using medTester 5000C menus
and function keys, see Navigating the Menus, in Chapter 3,
Instrument Familiarity.
Whenever you attempt to select a module that is not installed, this message
appears in the display:
MODULE NOT INSTALLED