Fluke Biomedical medTester 5000C - Manual (Page 194)

medTester 5000C
Operators Manual
12-16
WAVE COMMANDS
Note: The following commands turn on the specified wave. The wave continues to run until it
is changed by another wave command, or it will be turned off and disconnected by any non-
wave command or the EXIT command.
All wave commands return OK.
Command Explanation
W000 Zero output.
W001 2 Hz square wave.
W002 4 second pulse.
W003 10 Hz sine wave.
W004 40 Hz sine wave.
W005 60 Hz sine wave.
W006 100 Hz sine wave.
W007 1 kHz square wave.
W008 2 Hz triangle wave.
W009 60 Hz common mode rejection test.
W010 Normal Sinus ECG at 30 BPM.
W011 Normal Sinus ECG at 60 BPM.
W012 Normal Sinus ECG at 120 BPM.
W013 Normal Sinus ECG at 240 BPM.
W014 0.5 Hz sine wave.
W015 Atrial fibrillation 1, course.
W016 2nd degree AV block, type 1, Wenckebach.
W017 2nd degree AV block, type 2.
W018 Missed beat at 80 BPM.
W019 Missed beat at 120 BPM.
W020 PVC type 1, left.
W021 PVC type 2, right.
W022 Multifocal PVCs.
W023 PVC 1, R on T.
W024 A pair or couplet of PVCs.
W025 Run of 5 PVCs.
W026 Run of 11 PVCs.
W027 Right bundle branch block.
W028 Ventricular tachycardia 180 BPM.
W029 Ventricular fibrillation.
W030 Asystole 2, flat.