Fluke Biomedical medTester 5000C - Manual (Page 191)

Biomedical Test System
Remote Operation
12
12-13
FILE TRANSFER COMMANDS
(Note: Usage of these commands is described earlier.)
Command Explanation
AUTOSEQUP Upload the file containing medTester autosequences.
AUTOSEQDOWN Download the file containing medTester.
MUPUP Upload all test records in the MUP file format.
SDFUP Upload all test records in the SDF file format.
CHECKDOWN Download checklists as three (3) files: IDN, ITM, and
LST.
SETUP COMMANDS
(Note: These commands set up measurement global variables for the test receptacle
and the leakage test mode. At medTester power on, they reset to default which is
normal for the test receptacle and off for the leakage DC test mode.
Command Explanation
MedTester responses to these commands is the *
symbol.
TRGN Sets the test receptacle ground to normal.
TRGO Sets the test receptacle ground to open.
TRPN Sets the test receptacle polarity to normal.
TRPR Sets the test receptacle polarity to reverse.
TRNN Sets the test receptacle neutral to normal.
TRNO Sets the test receptacle neutral to open.
DCOFF Sets the leakage DC test mode to off.
DCON Sets the leakage DC test mode to on.