Artesyn ATCA-7470 Installation and Use (October 2014) - Manual (Page 97)

BIOS
ATCA-7470 Installation and Use (6806800P15K) 97
PCIe Error Flood Count 1(Default) to 65535 Number of PCIe errors which constitute a
flood condition when occurring within
error flood seconds
PCIe Error Flood Seconds 1 (Default) to10800 Number of seconds within which PCIe error
flood count or more PCIe errors constitute
a flood condition
Table 4-9 Advanced --> USB Configuration
Item Values Description
Front Panel USB 1 Enable (Default)
Disable Enable/Disable Front Panel USB 1 port
Front Panel USB 2 Enable (Default)
Disable Enable/Disable Front Panel USB 2 port
RTM USB Enable (Default)
Disable Enable/Disable USB port routed to the RTM
Table 4-10 Advanced --> SATA Configuration
Item Values Description
SATA Device Enable (Default)
Disable Enable/Disable SATA device
Operation Mode AHCI (Default)
IDE Select the SATA controllers operation mode.
AHCI: Advanced Host Controller Interface
mode
IDE: ATA compatible mode
Table 4-11 Advanced --> Super IO Configuration
Item Values Description
UART1 to Front Panel Enable (Default)
Disable This option controls the UART1. When
enabled, ART1 uses address 3F8h and IRQ
4. UART1 is connected to the front panel.
Table 4-8 Advanced --> Memory Configuration
Item Values Description