Artesyn ATCA-7470 Installation and Use (October 2014) User Manual

Page 88

Text mode
Original mode

BIOS

ATCA-7470 Installation and Use (6806800P15K)

By Setup

To select the boot device by setup, proceed as follows:

1. From the menu, select Boot.

2. Select the order of the devices from which BIOS attempts to boot the operating

system.

If BIOS is not successful at booting from one device, it tries to boot from the next device on the
list. When BIOS does not find any bootable device, the board will be restarted by a cold reset.

This manual is related to the following products:

ATCA-7470 Installation and Use (November 2014) ATCA-7470 Installation and Use (May 2014) ATCA-7475 Installation and Use (October 2014) ATCA-7475 Installation and Use (November 2014) ATCA-7475 Installation and Use (May 2014)