2 picmg 3.0 commands, Table 9-18, Supported picmg 3.0 commands – Artesyn ATCA-7470 Installation and Use (October 2014) User Manual
Page 223: Supported ipmi commands
Supported IPMI Commands
ATCA-7470 Installation and Use (6806800P15K)
223
9.2
PICMG 3.0 Commands
The Artesyn Embedded Technologies IPMC is a fully compliant AdvancedTCA intelligent
Platform Management Controller. It supports all required and mandatory AdvancedTCA
commands as defined in the PICMG 3.0 and AMC.0 R2.0 specifications.
Table 9-18 Supported PICMG 3.0 Commands
Command
NetFn
(Request/Response)
CMD
Comments
Get PICMG Properties
0x2C/0x2D
0x00
-
Get Address Info
0x2C/0x2D
0x01
-
FRU Control
0x2C/0x2D
0x04
The blade supports the
cold reset and graceful
reboot options.
Get FRU LED Properties
0x2C/0x2D
0x05
-
Get FRU LED Color Capabilities
0x2C/0x2D
0x06
-
Set FRU LED State
0x2C/0x2D
0x07
-
Get FRU LED State
0x2C/0x2D
0x08
-
Set IPMB State
0x2C/0x2D
0x09
-
Set FRU Activation Policy
0x2C/0x2D
0x0A
-
Get FRU Activation Policy
0x2C/0x2D
0x0B
-
Set FRU Activation
0x2C/0x2D
0x0C
-
Get Device Locator Record ID
0x2C/0x2D
0x0D
The Artesyn Embedded
Technologies IPMCs
support the standard
PICMG 3.0 and the
extended AMC.0 R2.0
versions of this command.
Set Port State
0x2C/0x2D
0x0E
-
Get Port State
0x2C/0x2D
0x0F
-
Compute Power Properties
0x2C/0x2D
0x10
-
Set Power Level
0x2C/0x2D
0x11
-
Get Power Level
0x2C/0x2D
0x12
-