Artesyn ATCA-7470 Installation and Use (October 2014) User Manual

Page 280

Text mode
Original mode

Replacing the Battery

ATCA-7470 Installation and Use (6806800P15K)

280

Replacement Procedure

To replace the battery, proceed as follows:

1. Remove battery.

2. Install the new battery following the "positive" and "negative" signs.

PCB and Battery Holder Damage
Removing the battery with a screw driver may damage the PCB or the battery holder. To
prevent this damage, do not use a screw driver to remove the battery from its holder.

This manual is related to the following products:

ATCA-7470 Installation and Use (November 2014) ATCA-7470 Installation and Use (May 2014) ATCA-7475 Installation and Use (October 2014) ATCA-7475 Installation and Use (November 2014) ATCA-7475 Installation and Use (May 2014)