Artesyn ATCA-7470 Installation and Use (October 2014) - Manual (Page 230)

Supported IPMI Commands
ATCA-7470 Installation and Use (6806800P15K) 230
The following table provides the feature set supported with ATCA-747x:
9.3.2.2 Get Feature Configuration
This command can be used to get the state of feature configuration during IPMC runtime.
Table 9-26 Feature Selector Assignments
Feature Selector Description
E0h FailSafe Function Enable/Disable
Table 9-27 Get Feature Configuration Command
Byte Data Field
Request Data 1 LSB of Artesyn IANA Enterprise Number. A value of CDh shall be
used.
2 2nd byte of Artesyn IANA Enterprise Number. A value of 65h
shall be used.
3 MSB of Artesyn IANA Enterprise Number. A value of 00h shall
be used.
4 Feature Selector, for details see Table "Feature Selector
Assignments" on page 230 .