4 switch settings, Figure 2-3, Switch location (bottom side of the blade) – Artesyn ATCA-7470 Installation and Use (October 2014) User Manual
Page 53
Hardware Preparation and Installation
ATCA-7470 Installation and Use (6806800P15K)
53
2.4
Switch Settings
All mechanical switches are OFF in their default configuration. Switch selection used only for
debugging are grouped in separate devices, which are not assembled in volume production.
Switches reside on the component side 1 and are not covered by any other component. Their
location is shown in the following figure:
Figure 2-3
Switch Location (Bottom Side of the Blade)