Artesyn ATCA-7470 Installation and Use (October 2014) - Manual (Page 221)

Supported IPMI Commands
ATCA-7470 Installation and Use (6806800P15K) 221
usb2 Front Panel USB2 on/off
usb_rtm RTM USB on/off
sata SATA Ports on/off
sata_mode SATA Mode ide/ahci
Table 9-16 boot_order Devices
Device Description
sataonboard Onboard SATA Flash Disk
satartm SATA disk connected to the RTM
sashdd Onboard SAS HDD
sas_nnn SAS Controller nnn = SCSI ID
(use this when using an SAS array)
frontnet1 Front Panel Network 1
frontnet2 Front Panel Network 2
basenet1 Base Network 1
basenet2 Base Network 2
rtmnet1 RTM Network 1
fabricnet1 Fabric Network 1
fabricnet2 Fabric Network 2
rtmnet2 RTM Network 2
rtmnet3 RTM Network 3
rtmnet4 RTM Network 4
rtmnet5 RTM Network 5
rtmnet6 RTM Network 6
usbcdrom USB Cdrom
usb1cdrom USB Cdrom connected to USB 1
usb2cdrom USB Cdrom connected to USB 2
Table 9-15 System Boot Options Parameter #100 - Supported Parameters (continued)
Parameter Description Values