Artesyn ATCA-7470 Installation and Use (October 2014) - Manual (Page 93)

BIOS
ATCA-7470 Installation and Use (6806800P15K) 93
4.7.2 Advanced
USB Legacy Enabled (Default),
Disabled Enables/Disables Legacy USB support for
USB mouse/keyboard and mass storage in
legacy operation systems like DOS.
Terminal Type ANSIVT100,VT100+
(Default), UTF8 Terminal Emulation: ANSI: Extended ASCII
char set. VT100: ASCII char set.VT100+:
Extends VT100 to support color, function
keys, etc.VT-UTF8: Uses UTF8 encoding to
map Unicode chars onto 1 or more bytes.
Baudrate 9600 (Default),
19200,38400,57600,
115200 Selects the baud rate of the serial console.
Flow Control None (Default), RTS/CTS,
XON/XOFF Set flow control for the serial console. None:
No flow control, RTS/CTS: Hardware flow
control, XON/XOFF: Software flow control
Console Redirection after
POST Enabled (Default),
Disabled Enable Console Redirection after BIOS exits.
This is used for OS like DOS or legacy boot
loader like grub.
Table 4-2 Main -> Boot Configuration
Item Values Description
Table 4-3 Advanced --> RTM Configuration
Item Values Description
Auto-Detect RTM Enable (Default)
Disable If enabled, the RTM is detected and the
RTM PCIe parameter are set for this RTM. If
disabled, the RTM PCIe parameter can be
set manually.
CPU0 PCIe to RTM Width x4x4x4x4, x4x4x8,
x8x4x4, x8x8 (Default),
x16 Selects CPU0 PCIe port Bifurcation for
Zone 3 connector (RTM).
CPU0 PCIe to RTM Speed Auto (Default),
Gen1,Gen2,Gen3 Selects CPU0 PCIe Speed for Zone 3
connector (RTM).Auto: uses the highest
possible PCIe speed Gen1: 2.5 GT/s Gen2:
5 GT/s Gen3: 8 GT/s