Artesyn ATCA-7470 Installation and Use (October 2014) - Manual (Page 219)

Supported IPMI Commands
ATCA-7470 Installation and Use (6806800P15K) 219
os_boot_watchdog OS boot Watchdog (IPMI) on/off, timeout in minutes, action
Timeout range 1,2,3,5,7,10,15,20
action: noaction/reset,poweroff,
powercycle
ipmi_irq Use IPMI KCS interrupt off/on
failsave Configure IPMI Fail Save feature off/on/no change
rtm_auto Automatically detect the RTM off/on
rtm_cpu0 PCIe CPU0 configuration
PCIe bifurcation
PCIe max speed width, speed
width=x4x4x4x4/x4x4x8/x8x4x4/x8
x8/x16
speed=auto/gen1/gen2/gen3
rtm_cpu1 PCIe CPU1 configuration
PCIe bifurcation
PCIe max speed width, speed
width=x4x4x4x4/x4x4x8/x8x4x4/x8
x8/x16
speed=auto/gen1/gen2/gen3
frontnet_boot Boot from Front Panel
Network off/on
basenet_boot Boot from Base Network off/on
fabricnet_boot Boot from Fabric Network off/on
artm_net_boot Boot from ARTM Network off/on
artm_sas_boot Boot from ARTM SAS device off/on
com_fc Console flow control off/hard/soft
com_ap Console Redirection after POST on/off
usb_legacy USB legacy (DOS) support on/off
cpu_ac Number of active Cores per CPU all/1/2/3/4/5/6/7/8/9
cpu_ht Hyperthreading on/off
cpu_ed Execution Disable on/off
cpu_dca Direct Cache Access on/off
cpu_vt Virtualization on/off
cpu_ss SpeedStep on/off
Table 9-15 System Boot Options Parameter #100 - Supported Parameters (continued)
Parameter Description Values