Artesyn ATCA-7470 Installation and Use (October 2014) - Manual (Page 256)

FRU Information and Sensor Data Records
ATCA-7470 Installation and Use (6806800P15K) 256
10.3 Power Configuration
10.4 Sensor Data Records
The sensors available on the blades are shown in the table below. See Table 10-7 on page 262
for a detailed description of the Sensor Data Records.
Table 10-5 Power Configuration
Item Value Description
Dynamic power
reconfiguration support No While the blade is powered, it
supports only one power level.
Dynamic power
configuration No The power level is fixed and does
not change).
Number of power draw
levels 1 The amount of possible power
levels
Early Power Draw Levels,
Watt - Complete early power level
including IPMC
Steady state Power Draw
Levels, Watt 1.8 GHz 8x4GB DDR3 + RTM
Max - 260 Watts Complete steady power
consumption including IPMC
Transition from early to
steady levels, sec 0s -
Table 10-6 IPMI Sensors Overview
Sensor Number Sensor Name Sensor Type Description
0 Hot Swap Carrier Hot Swap 0xF0 Refer Table "Sensor Data
Records" on page 262 .
1 ACC Module Hot Swap 0xF0 Refer Table "Sensor Data
Records" on page 262 .
2 Hotswap_RTM Hot Swap 0xF0 Refer Table "Sensor Data
Records" on page 262 .
3 Version change Version Change 0x2B Refer Table "Sensor Data
Records" on page 262 .