Artesyn ATCA-7470 Installation and Use (October 2014) - Manual (Page 208)

Supported IPMI Commands
ATCA-7470 Installation and Use (6806800P15K) 208
9.1.3 Watchdog Commands
The watchdog commands are supported by blades providing a system interface and a
watchdog type 2 sensor.
The options pre-timeout and power-cycle are not supported.
Set Channel Access 0x06/0x07 0x40
Get Channel Access 0x06/0x07 0x41
Get Channel Info 0x06/0x07 0x42
Set User Access 0x06/0x07 0x43
Get User Access 0x06/0x07 0x44
Set User Name 0x06/0x07 0x45
Get User Name 0x06/0x07 0x46
Set User Password 0x06/0x07 0x47
Set User Payload Access 0x06/0x07 0x4C
Get User Payload Access 0x06/0x07 0x4D
Set Channel Security Keys 0x06/0x07 0x5C
Table 9-2 Supported System Interface Commands (continued)
Command NetFn (Request/Response) CMD
Table 9-3 Supported Watchdog Commands
Command NetFn (Request/Response) CMD
Reset Watchdog Timer 0x06/0x07 0x22
Set Watchdog Timer 0x06/0x07 0x24
Get Watchdog Timer 0x06/0x07 0x25