Altera DisplayPort MegaCore Function User Manual
Page 93
File Type
File
Description
Waveform
.do
files
all.do
Waveform that shows a combination of all waveforms.
reconfig.do
Waveform that shows the signals involved in reconfi‐
guring the transceiver.
rx_video_out.do
Waveform that shows the rx_video_out signals from
the DisplayPort IP core mapped to the CVI input.
tx_video_in.do
Waveform that shows the
tx_vid_v_sync
,
tx_vid_h_
sync
,
de
,
tx_vid_de
,
tx_vid_f
, and
tx_vid_
data[23:0]
signals at 256 pixels per line and 8 bpp, i.
Miscellaneous
files
readme.txt
Documentation for the simulation example.
edid_memory.hex
Initial content for the EDID ROM.
Table 7-2: Simulation Example Files for Arria V, Cyclone V, and Stratix V Devices
Files are named <prefix>_<name>.<extension> where <prefix> represents the device (av for Arria V devices, cv for
Cyclone V devices, and sv for Stratix V devices).
File Type
File
Description
System Verilog
HDL design
files
<prefix>
_dp_harness.sv
Top-level test harness.
Verilog HDL
design files
<prefix>
_dp_example.v
Design under test (DUT).
dp_mif_mappings.v
Table translating MIF mappings for transceiver
reconfiguration.
dp_analog_mappings.v
Table translating VOD and pre-emphasis settings.
reconfig_mgmt_hw_ctrl.v
Reconfiguration manager top-level.
reconfig_mgmt_write.v
Reconfiguration manager FSM for a single write
command.
clk_gen.v
Clock generation file.
freq_check.sv
Top-level file for the frequency checker.
rx_freq_check.sv
RX frequency checker.
tx_freq_check.sv
TX frequency checker.
UG-01131
2015.05.04
Copy the Simulation Files to Your Working Directory
7-5
DisplayPort IP Core Simulation Example
Altera Corporation