Cisco ASA 5505 - Manual (Page 726)

36-14
Cisco ASA 5500 Series Configuration Guide using the CLI
Chapter 36 Configuring the Identity Firewall
Task Flow for Configuring the Identity Firewall
Configuring Identity Options
Perform this procedure to add or edit the Identity Firewall feature; select the Enable check box to enable
the feature. By default, the Identity Firewall feature is disabled.
Prerequisites
Before configuring the identify options for the Identity Firewall, you must you must meet the
prerequisites for the AD Agent and Microsoft Active Directory. See
Prerequisites, page 9 the
requirements for the AD Agent and Microsoft Active Directory installation.
To configure the Identity Options for the Identity Firewall, perform the following steps: