Cisco ASA 5505 - Manual (Page 1035)

48-53
Cisco ASA 5500 Series Configuration Guide using the CLI
Chapter 48 Configuring the Cisco Phone Proxy
Feature History for the Phone Proxy
class sec_sip
inspect sip phone-proxy mypp
service-policy pp_policy interface data
Feature History for the Phone Proxy
Table 48-7 lists the release history for this feature.
Table 48-7 Feature History for Cisco Phone Proxy
Feature Name Releases Feature Information
Cisco Phone Proxy 8.0(4) The phone proxy feature was introduced. The following
new commands were introduced.
cipc security-mode authenticated, clear configure ctl,
clear configure phone-proxy, cluster-ctl-file,
cluster-mode nonsecure, ctl-file (global), ctl-file (phone
proxy), debug phone proxy, disable service-settings,
media-termination address, phone-proxy, proxy-server,
record-entry, sast, show phone-proxy, show
running-config ctl, show running-config phone-proxy,
timeout secure-phones, tftp-server address.
NAT for the media termination address 8.1(2) The media-termination address command was changed to
allow for NAT:
[no] media-termination address ip_address interface
intf_name
Where the interface inft_name keyword was added.
The rtp-min-port and rtp-max-ports keywords were
removed from the command syntax and included as a
separate command:
rtp-min-port port1 rtp-max-port port2