Cisco 3200 Series User Manual
Cisco 3200 series router hardware upgrade guide
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
526-4000
800 553-NETS (6387)
Fax: 408
527-0883
Cisco 3200 Series Router Hardware
Upgrade Guide
September, 2008
Customer Order Number: NA
Text Part Number: OL-15983-01
Table of contents
Document Outline
- Cisco 3200 Series Router Hardware Upgrade Guide
- Contents
- About This Guide
- Introduction
- Replacing Cards in the Cisco 3230 ISR Rugged Enclosure
- Card Replacement Process
- Disconnecting All Cables from the Enclosure
- Removing the Antenna End Cap
- Removing the I/O End Cap
- Removing the Wiring Card
- Removing the Card Stack
- Replacing or Adding a New Card
- Inserting the Card Stack into the Extrusion
- Reattaching the Wiring Card
- Reattaching the I/O End Cap
- Reattaching the Antenna End Cap
- Applying New I/O End Cap Function Labels
- Card Replacement Process
- Replacing Cards in the Cisco ISR 3270 Rugged Enclosure
- Card Replacement Process
- Disconnecting All Cables from the Enclosure
- Removing the Antenna End Cap
- Removing the I/O End Cap
- Removing the Wiring Card
- Removing the Card Stack
- Replacing or Adding a New Card
- Inserting the Card Stack into the Enclosure
- Reattaching the Wiring Card
- Adjusting the WMIC Jumper Settings
- Reattaching the I/O End Cap
- Reattaching the Antenna End Cap
- Applying New I/O End Cap Function Labels
- Card Replacement Process
- Replacing the SFP Module
- Index