Table 80-1 – Cisco ASA 5505 User Manual
Page 1822
80-10
Cisco ASA 5500 Series Configuration Guide using the CLI
Chapter 80 Configuring Anonymous Reporting and Smart Call Home
Configuring Anonymous Reporting and Smart Call Home
Configuring Alert Group Subscription
To subscribe a destination profile to an alert group, perform this task:
Detailed Steps
Table 80-1
Severity and Syslog Level Mapping
Level
Keyword
Equivalent Syslog
Level
Description
9
catastrophic
N/A
Network-wide catastrophic failure.
8
disaster
N/A
Significant network impact.
7
fatal
Emergency (0)
System is unusable.
6
critical
Alert (1)
Critical conditions, immediate attention needed.
5
major
Critical (2)
Major conditions.
4
minor
Error (3)
Minor conditions.
3
warning
Warning (4)
Warning conditions
2
notification
Notice (5)
Basic notification and informational messages.
Possibly independently insignificant.
1
normal
Information (6)
Normal event signifying return to normal state.
0
debugging
Debug (7)
Debugging messages (default setting).
Command
Purpose
Step 1
call-home
Example:
hostname(config) # call-home
Enters call-home configuration mode.
Step 2
alert-group
{all | configuration | diagnostic |
environment
| inventory | syslog}
Example:
ciscoasa(cfg-call-home)# alert-group all
Enables the specified Smart Call Home group. Use
the keyword all to enable all alert groups. By
default, all alert groups are enabled.
Step 3
profile
profile-name
Example:
hostname(cfg-call-home)# profile profile1
Enters the profile configuration submode for the
specified destination profile.
Step 4
subscribe-to-alert-group configuration
[periodic
{daily hh:mm | monthly date hh:mm | weekly day
hh:mm}]
Example:
hostname(cfg-call-home-profile)#
subscribe-to-alert-group configuration periodic
weekly Wednesday 23:30
Subscribes this destination profile to the
configuration alert group. The configuration alert
group can be configured for periodic notification, as
described in the
To subscribe to all available alert groups, use the
subscribe-to-alert-group all command.