Cisco 3545 MCU User Manual
Cisco Hardware
Table of contents
Document Outline
- Installation and Upgrade Guide for Cisco Unified Videoconferencing 3545 MCU Releases 5.6 and 5.7
- Contents
- Functionality
- Installing the Cisco Unified Videoconferencing 3545 MCU
- Physical Description
- Verifying the Package Contents
- Mounting the Cisco Unified Videoconferencing 3545 Chassis in a 19-inch Rack
- Installing the MCU and EMP
- Removing the MCU and EMP
- How to Perform the Initial MCU Configuration
- About the Initial Configuration and Boot Phases
- Connecting to a PC
- Setting the IP Address
- Setting Ethernet Speed and Duplex Parameters
- Setting a TFTP Server
- Changing the Global User Name and Password
- Connecting the Cisco Unified Videoconferencing 3545 MCU to the LAN
- Upgrading Cisco Unified Videoconferencing 3545 MCU Software
- How to Perform the Initial EMP Configuration
- About the Initial EMP Configuration
- Accessing the Cisco Unified Videoconferencing 3545 EMP Main Menu
- Setting the IP Address
- Changing the Configuration Software Password
- Changing the Security Level
- Pointing the EMP to the Controlling MCU
- Changing Advanced Configuration Settings
- Saving Network Configuration Settings
- Connecting the EMP to the LAN
- Accessing the MCU Administrator Interface
- Using the MCU Setup Wizard
- Registering the Online Help for the 3545 MCU
- Using the Cisco Software Upgrade Utility
- Cable Connections and Pin-outs
- Technical Specifications
- Safety
- Compliance and Certifications
- Index