Testing call home communications – Cisco ASA 5505 User Manual
Page 1823
80-11
Cisco ASA 5500 Series Configuration Guide using the CLI
Chapter 80 Configuring Anonymous Reporting and Smart Call Home
Configuring Anonymous Reporting and Smart Call Home
Testing Call Home Communications
You can test Smart Call Home communications by sending messages manually using two command
types. To send a user-defined Smart Call Home test message, use the call-home test command. To send
a specific alert group message, use the call-home send command.
These sections describe Smart Call Home communication:
•
Sending a Smart Call Home Test Message Manually, page 80-12
•
Sending a Smart Call Home Alert Group Message Manually, page 80-12
•
Sending the Output of a Command, page 80-12
Step 5
subscribe-to-alert-group environment
[severity
{catastrophic | disaster | emergencies | alert |
critical
| errors | warnings | notifications |
informational
| debugging}]
Example:
hostname(cfg-call-home-profile)#
subscribe-to-alert-group examplealertgroupname
severity critical
Subscribes to group events with the specified
severity level. The alert group can be configured to
filter messages based on severity, as described in
Step 6
subscribe-to-alert-group syslog [severity
{catastrophic | disaster | fatal | critical | major
| minor | warning | notification | normal |
debugging} [pattern
string]]
Example:
hostname(cfg-call-home-profile)#
subscribe-to-alert-group syslog severity
notification pattern UPDOWN
Subscribes to syslog events with a severity level or
message ID. The syslog alert group can be
configured to filter messages based on severity, as
described in
.
Step 7
subscribe-to-alert-group inventory [periodic {daily
hh:mm | monthly date hh:mm | weekly day hh:mm}]
Example:
hostname(cfg-call-home-profile)#
subscribe-to-alert-group inventory periodic daily
06:30
Subscribes to inventory events. The configuration
alert group can be configured for periodic
notification, as described in the
Alert Groups” section on page 80-9
.
Step 8
subscribe-to-alert-group
telemetry periodic {hourly
| daily | monthly day | weekly day [hh:mm]}
Example:
hostname(cfg-call-home-profile)#
subscribe-to-alert-group monthly 15
Subscribes to telemetry periodic events. The
configuration alert group can be configured for
periodic notification, as described in the
“Subscribing to Alert Groups” section on page 80-9
.
Step 9
subscribe-to-alert-group snapshot periodic
{interval
minutes
| hourly | daily | monthly day_of_month |
weekly
day_of_week [hh:mm]}
Example:
hostname(cfg-call-home-profile)#
subscribe-to-alert-group snapshot periodic interval
weekly wendesday 23:15
Subscribes to snapshot periodic events. The
configuration alert group can be configured for
periodic notification, as described in the
“Subscribing to Alert Groups” section on page 80-9
.
Command
Purpose