Detailed steps, Asa 5505 – Cisco ASA 5505 User Manual
Page 1228
58-8
Cisco ASA 5500 Series Configuration Guide using the CLI
Chapter 58 Configuring the ASA IPS Module
Configuring the ASA IPS module
Detailed Steps
ASA 5505
The ASA 5505 does not have a dedicated management interface. You must use an ASA VLAN to access
an internal management IP address over the backplane. For a factory default configuration, connect the
management PC to one of the following ports: Ethernet 0/1 through 0/7, which are assigned to VLAN 1.
ASA 5512-X through ASA 5555-X (Software Module)
These models run the ASA IPS module as a software module, and the IPS management interface shares
the Management 0/0 interface with the ASA.
Security
Services
Card Slot
1
2
POWER
48VDC
7
POWER over ETHERNET
6
5
4
3
2
1
0
Console
RESET
Ports 1 − 7 VLAN 1
Default ASA IP: 192.168.1.1/IPS IP: 192.168.1.2
Default IPS Gateway: 192.168.1.1 (ASA)
ASA 5505
Management PC
(IP Address from DHCP)
Cisco ASA SSC-05
STATUS
ASA 5545-X
PC (IP Address
from DHCP)
IPS Management 0/0
192.168.1.2
ASA Management 0/0
192.168.1.1
33
11
8
1