Rockwell Automation 1398-DDM-xxx USE MNL/ULTRA 200 DIG.SERVO.DR - Manual (Page 34)

Publication 1398-5.0 – October 1998
2-4 Selecting Other System Components
Multiple Protection Circuits
Device and circuit protection, and diagnostic information is provided
by:
●
Seven segment drive status display
●
Overtemperature, short circuit and overcurrent protection for the
power output
●
I
2
T (power-time) protection
●
Bus Overvoltage
●
Bus Undervoltage
●
Overspeed
●
Fault diagnostics
●
Fused power supply outputs
●
Three watchdog timers provide fail-safe operation
ULTRA Master Software
A Windows based software interface provides start-up selections.
Tasks are organized for efficient set up, control and maintenance.
Context sensitive, on-line help provides immediate assistance.
●
Set up is simplified by a series of logically arranged set up
screens.
●
Files can be stored and printed for on-line or off-line
modification, and on-site or off-site back-up.
●
Diagnostic and set up tools make system integration easy.
●
Critical information is available with complete on-line help.
●
User defined velocity, acceleration, position and torque
parameters.
●
Tuning and diagnosis is aided with an on-screen dual channel
digital oscilloscope.
●
On-screen meters and software tools provide rapid debugging and
measurement.
Communications
One serial port, with two connectors, allows from 1 to 32 drives to be
connected in parallel using four-wire RS-485 communications. The
serial interface allows the user to program a drive using any PC or
host computer that permits RS-232 or four-wire RS-485
communications.