Rockwell Automation 1398-DDM-xxx USE MNL/ULTRA 200 DIG.SERVO.DR - Manual (Page 209)

Publication 1398-5.0 – October 1998
Options and Accessories A-3
Publications
Interface Cables Diagrams and schematics for cables listed below are shown in
Appendix B, “Interface Cables”, beginning on page B-3.
Serial Interface Cables
Diagrams and schematics for cables listed below are shown in
Appendix B, “Interface Cables”, beginning on page B-11.
Description Publication
Number
Manuals
• TouchPad Card 1398-5.5
• Installation Manual
1398-DDM-010 or 1398-DDM-010X, 1398-DDM-020 or 1398-DDM-020X, 1398-DDM-030 or
1398-DDM-030X, 1398-DDM-075 or 1398-DDM-075X, 1398-DDM-150 or 1398-DDM-150X
1398-5.0
• Installation Manual
1398-DDM-005 or 1398-DDM-005X, 1398-DDM-009 or 1398-DDM-009X, 1398-DDM-019 or
1398-DDM-019X
1398-5.2
Description m (ft) Part Number
J1 to customer supplied connector (no connector) 3 (10)
7.6 (25)
15 (50)
23 (75)
9101-1370-010
9101-1370-025
9101-1370-050
9101-1370-075
J3 to customer supplied connector (no connector)
(ULTRA 200 Series drives only) 3 (10)
7.6 (25)
15 (50)
23 (75)
9101-1368-010
9101-1368-025
9101-1368-050
9101-1368-075
J3 to J3 (Master/Follower)
(ULTRA 200 Series drives only) 0.6 (2) 9101-1463-002
Description m (ft) Part Number
J4/J5 to PC [RS-232]
(9 pin D-shell connector) 3 (10)
7.6 (25)
15 (50)
9101-1372-010
9101-1372-025
9101-1372-050
J4/J5 to customer supplied connector
(no connector) 3 (10)
7.6 (25)
15 (50)
9101-1379-010
9101-1379-025
9101-1379-050
J4/J5 to J4/J5 four wire RS-485 communications 1 (3) 9101-1374-001
J4/J5 D-shell 9-pin Mating Connector
(AMP 205204-4) 003-5529-001
J4/J5 Crimp Pins for Connector
(AMP 66506-3) 0003-5326-001