Rockwell Automation 20D PowerFlex 700S Drive Ph I Control, Frames 1...11 - Manual (Page 235)

Appendix
H
PowerFlex 700S Multi-Device Interface Option
Card
Specifications MDI Option Card Specifications
Supported Linear Sensors
Temposonics® III Linear sensors with MTS® part numbers ending in
1S2G1102 work with the MDI Option.
Temposonics® is a registered trademark of MTS Systems Corporation.
For information about: See page
Specifications H-1
Wiring the MDI Option Card H-3
Consideration Description
Rotary Encoder Voltage Supply 11.5V dc @ 130 mA
Rotary Encoder Hi-Resolution
Feedback Sine/Cosine 1V P-P Offset 2.5
Rotary Encoder Maximum Cable
Length 182m (600 ft.)
Rotary Encoder RS-485 Interface The MDI Option card obtains the following information via the
Hiperface RS-485 interface shortly after power-up:
• Address
• Command Number
• Mode
• Number of turns
• Number of Sine/Cos cycles
• Checksum
Registration Inputs high speed 12-24V dc sinking digital inputs
Customer-I/O plug (P1) Allen-Bradley PN: S94274917
Weidmuller PN: 67601782
Part Number
Character
Characteristic
1 Input Voltage = +24Vdc
S SSI output
2 Data Length = 24 Bits
G Output Format = Gray Code
1 Resolution = 0.005 mm
1 Performance = Standard
02 Scale Orientation = Forward-acting Synchronized