Rockwell Automation 20D PowerFlex 700S Drive Ph I Control, Frames 1...11 - Manual (Page 122)

3-68 Programming and Parameters
704 Fault Clr Owner
Indicates which adapter is currently clearing a fault.
707 Data In A1 Int
Link A Word 1 (Integer) - Parameter number whose value will be written from a
communications device data table. Parameters that can only be changed while the drive
is stopped cannot be used as Datalink inputs. Entering a parameter of this type will
"Disable" the link. Refer to the manual that came with your communications option for
datalink information.
Default:
Min/Max: 0
-/+2147483648 32-bit
Integer
708 Data In A1 Real
Link A Word 1 (Real or Floating Point) - Parameters that can only be changed while the
drive is stopped cannot be used as Datalink inputs. Entering a parameter of this type will
"Disable" the link. Refer to the manual that came with your communications option for
datalink information.
Default:
Min/Max: 0.0000
-/+2200000000.0000 Real
709 Data In A2 Int
Link A Word 2 (Integer) - Parameter number whose value will be written from a
communications device data table. Parameters that can only be changed while the drive
is stopped cannot be used as Datalink inputs. Entering a parameter of this type will
"Disable" the link. Refer to the manual that came with your communications option for
datalink information.
Default:
Min/Max: 0
-/+2147483648 32-bit
Integer
710 Data In A2 Real
Link A Word 2 (Real or Floating Point) - Parameters that can only be changed while the
drive is stopped cannot be used as Datalink inputs. Entering a parameter of this type will
"Disable" the link. Refer to the manual that came with your communications option for
datalink information.
Default:
Min/Max: 0.0000
-/+2200000000.0000 Real
711 Data In B1 Int
Link B Word 1 (Integer) - Parameter number whose value will be written from a
communications device data table. Parameters that can only be changed while the drive
is stopped cannot be used as Datalink inputs. Entering a parameter of this type will
"Disable" the link. Refer to the manual that came with your communications option for
datalink information.
Default:
Min/Max: 0
-/+2147483648 32-bit
Integer
712 Data In B1 Real
Link B Word 1 (Real or Floating Point) - Parameters that can only be changed while the
drive is stopped cannot be used as Datalink inputs. Entering a parameter of this type will
"Disable" the link. Refer to the manual that came with your communications option for
datalink information.
Default:
Min/Max: 0.0000
-/+2200000000.0000 Real
713 Data In B2 Int
Link B Word 2 (Integer) - Parameter number whose value will be written from a
communications device data table. Parameters that can only be changed while the drive
is stopped cannot be used as Datalink inputs. Entering a parameter of this type will
"Disable" the link. Refer to the manual that came with your communications option for
datalink information.
Default:
Min/Max: 0
-/+2147483648 32-bit
Integer
714 Data In B2 Real
Link B Word 2 (Real or Floating Point) - Parameters that can only be changed while the
drive is stopped cannot be used as Datalink inputs. Entering a parameter of this type will
"Disable" the link. Refer to the manual that came with your communications option for
datalink information.
Default:
Min/Max: 0.0000
-/+2200000000.0000 Real
715 Data In C1 Int
Link C Word 1 (Integer) - Parameter number whose value will be written from a
communications device data table. Parameters that can only be changed while the drive
is stopped cannot be used as Datalink inputs. Entering a parameter of this type will
"Disable" the link. Refer to the manual that came with your communications option for
datalink information.
Default:
Min/Max: 0
-/+2147483648 32-bit
Integer
716 Data In C1 Real
Link C Word 1 (Real or Floating Point) - Parameters that can only be changed while the
drive is stopped cannot be used as Datalink inputs. Entering a parameter of this type will
"Disable" the link. Refer to the manual that came with your communications option for
datalink information.
Default:
Min/ Max: 0.0000
-/+2200000000.0000 Real
No.
Name
Description
Values Li
nkab
le
Read
-Wr
it
e
Da
ta
T
ype
Options
Unde
fined
Unde
fined
Unde
fined
Unde
fined
Unde
fined
Unde
fined
Unde
fined
Unde
fined
Dr
iv
eLog
ix
Res
er
ved
In
t DPI
Co
nn
Res
er
ved
A
ux
DP
I Conn
Ext DPI Con
n
Loc
al HI
M
Te
rm
inal Blk
Default 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0 = False
1 = True