JLG 70H Parts Manual - Manual (Page 310)

4-12 3120290
SECTION 4 PLATFORMS
S
E
C
T
I
O
N
4
P
L
A
T
F
O
R
M
S
201 (cont’d) 3510276 Platform - Rotating Support (August 1990 to
Present)
3510254 Platform with Welded-on Bumpers (Standard
Controls)
3510279 Platform with Welded-on Bumpers (Hydraulic
Controls)
3510276 Platform with Chain Attached Bumpers
3510512 Platform with Mesh to Top Rail
3’ x 6’ (91.5cm x 183cm)
3510223 Platform - Rotating Support (Prior to August
1990)
3510277 Platform - Rotating Support (August 1990 to
Present)
3510393 Platform with Welded-on Bumpers
3510277 Platform with Chain-Attached Bumpers
3’ x 8’ (91.5cm x 244cm)
3510211 Platform - Rotating Support (Prior to August
1990)
3510278 Platform - Rotating Support (August 1990 to
Present)
3510380 Platform with Welded-on Bumpers
3510278 Platform with Chain Attached Bumpers
Standard Platform Components A/R
202 2600143 Pin, Hinge 2
203 3311805 Locknut 1/2”-13NC 2
204 2160006 Fitting, Grease 2
205 1780145 Door Weldment (Machines Built Prior to April
1990) 1
1780252 Door Weldment (Machines Built August 1990 to
Present) 1
1780288 Door Weldment with Mesh to Top Rail 1
206 2940006 Latch, Door 1
207 2560010 Handle 1
208 0960564 Bushing, Bronze 2
0237963 FOOTSWITCH INSTALLATION Ref. 7
301 0641408 Bolt 1/4”-20NC x 1” 3
3311405 Locknut 1/4”-20NC 3
4740362 Washer, Fender 3
4360031 Footswitch 1
7000625 Block, Contact 2
4460071 Connector, Strain Relief 1
FIGURE 4-2. LOW MOUNT PLATFORM AND FOOTSWITCH INSTALLATION (CONTINUED)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.