JLG 70H Parts Manual - Manual (Page 259)

3120290 2-181
SECTION 2 TURNTABLE
S
E
C
T
I
O
N
2
T
U
R
N
T
A
B
L
E
105 (cont’d) 0237067
Machines Without Prop Tele and with Adeco
Throttle (December 1985 to Present)
0237067
Machines With Prop Tele and with Adeco Throt-
tle (October 1985 to Present)
106 Not Used
107 Not Used
108 1060016 Cable, Electrical - 16/3 to Limit Switches 12 ft.
0236886
GROUND CONTROL INSTALLATIONS (WITHOUT
PROP TELE)
Ref. D
0236290
GROUND CONTROL INSTALLATIONS (WITH PROP
TELE)
Ref. J
201 Not Used
202 Door Options: 1
1780146 Door - 14” W x 20 1/2” H (Prior to May 1985)
1780184
Door - 14” W x 20 1/2” H (May 1985 to March
1991)
1780234
Door - 17 5/8” W x 22 1/2” H (March 1991 to
Present)
203 2940042 Latch 1
204 3380309 Panel, Gauge 1
205 3300182 Nut, Retainer 3
206 2420006 Ammeter 1
207 4751400 Flatwasher 1/4” 10
208 2420009 Hourmeter 1
209 0641408 Bolt 1l/4”-20NC x 1” 6
210 4761400 Lockwasher 1/4” 16
211 3311401 Nut 1/4”-20NC 13
212 4300031 Stud (Welded on Part) 5
213 2600094 Hinge 1
214 0100011 Loctite #242 (Not Shown) A/R
GAUGES INSTALLATION (FROM ENGINE
INSTALLATION) (VARIABLE PARTS)
Ref.
271 Oil Pressure Gauge Options: 1
2420030 Deutz Powered Machines
2420035 Ford Powered Machines
Consult Factory Wisconsin Powered Machines
272 2420001 Fitting, Swivel 1
273 2200261 Fitting, Coupling 1
274 Hose Options: A/R
Consult Factory Ford and Deutz Powered Machines
2750527 Wisconsin Powered Machines
275 Temperature Gauge Options: A/R
Not Required Deutz Powered Machines
2420019 Ford Powered Machines
Not Required Wisconsin Powered Machines
FIGURE 2-42. GROUND CONTROL COMPONENTS INSTALLATION (MACHINES WITH RACINE
PROPORTIONAL VALVES) (CONTINUED)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.