JLG 70H Parts Manual - Manual (Page 28)

1-20 3120290
SECTION 1 FRAME
S
E
C
T
I
O
N
1
F
R
A
M
E
WHEEL DRIVE INSTALLATION - MACHINES WITH
REXROTH MOTORS (USED WITH VICKERS
VALVES/MACHINES BUILT MAY 1992 TO PRESENT)
NOTE: DOUBLE QUANTITY FOR 4WD.
Ref.
0252365/
0252367
WHEEL DRIVE INSTALLATION - 2WD MACHINES
WITH REXROTH MOTORS (PRIOR TO S/N 51532)
Ref. 3/4
0270161/
0270214
WHEEL DRIVE INSTALLATION - 2WD MACHINES
WITH REXROTH MOTORS (S/N 51532 TO PRES-
ENT)
Ref. 1/1
0253247
WHEEL DRIVE INSTALLATION - 4WD MACHINES
WITH REXROTH MOTORS (PRIOR TO S/N 51532)
Ref. 4
0270162
WHEEL DRIVE INSTALLATION - 4WD MACHINES
WITH REXROTH MOTORS (S/N 51532 TO PRES-
ENT)
Ref. 1
301
Hub Assembly Options (See Figure 1-16 for Break-
down):
A/R
2780187 2WD Hub Assembly - 73:1 Ratio 2
2780114 4WD Hub Assembly - 53.58:1 Ratio 4
302
Brake Assembly Options (See Figure 1-14 for
Breakdown):
2
0920084 Prior to S/N 33476
0920110 S/N 33476 to S/N 51432
0920117 S/N 51432 to Present
303 See Note
Drive Motor Assembly - Rexroth (See Figure 1-9
for Breakdown)
2
Note: Refer to Application
2WD/2WS Rear - Use p/n 3160213 Motor Plus
p/n 2900869 Conversion Kit as Replacement.
2WD/2WS Rear - Use p/n 3160204 Motor Plus
p/n 2900869 Conversion Kit as Replacement.
4WD/2WS Front - Use p/n 3160204 Motor Plus
p/n 2900869 Conversion Kit as Replacement.
4WD/2WS Rear - Use p/n 3160213 Motor Plus
p/n 2900869 Conversion Kit as Replacement.
4WD/4WS Front & Rear - Use p/n 3160204
Motor Plus p/n 2900869 Conversion Kit as
Replacement.
304 0642016 Bolt 5/8”-11NC x 2” 16
305 4762000 Lockwasher 5/8” 16
306 Stud Options: 4
4300092 Stud 1/2”-13NC x 5 1/2” (Prior to S/N 51432)
4300097 Stud 1/2”-13NC x 5 1/8” (S/N 51432 to Present)
307 4761800 Lockwasher 1/2” 4
308 3311801 Nut 1/2”-13NC 4
309 0100011 Loctite #242 (Not Shown) A/R
310 3300007 Lugnut 3/4”-16NF 20
311 4751800 Flatwasher 1/2” 4
FIGURE 1-4. TIRE AND WHEEL DRIVE INSTALLATIONS (CONTINUED)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.