Xerox 4595 con Xerox FreeFlow DocuSP Print Controller-15553 - Manual (Page 83)

Xerox 4595 Copier/Printer System Administration Guide 4-3
4. E-mail
Register a Mail Account
In order to use e-mail on the machine, a mail account for the
machine needs to be registered.
Configuring the E-mail
Environment
Enable the port and configure the machine e-mail address, TCP/
IP environment, and e-mail server from the machine.
NOTE: The configuration can also be performed using
CentreWare Internet Services.
Configuration procedure
Overview
This section describes the configuration procedure to use the e-
mail feature on the machine.
The following two steps are necessary to use the e-mail feature:
•
Enabling the port and setting TCP/IP: Set the machine to be
able to use TCP/IP
• Configuring the e-mail feature: Set the e-mail function items
on the machine.
Enabling the ports and setting the IP addresses
This section describes the configuration procedure to use TCP/IP
on the machine.
First enable the e-mail port, then set the IP address.
NOTE 1: The configuration can also be performed using
CentreWare Internet Services.
NOTE 2: Enable the SOAP port and the SNMP port in most cases.
Refer to “Using CentreWare Internet Services” on page 3-1.
1. Display the
System Administrator Menu
screen.
a. Press the
Log In/Out
button.
b. Enter the UserID using the numeric keypad and select
Confirm
.
NOTE: The default User ID value is 11111. When using the
Authentication feature, a password is required. The default
password is x-admin.
c. Select
System Settings
.