Xerox 4595 con Xerox FreeFlow DocuSP Print Controller-15553 - Manual (Page 180)

Xerox 4595 Copier/Printer System Administration Guide 8-22
8. Setups
Auto Job Release
If an error occurs during a copy or scan job, you can set the time
that elapses until the current job is automatically cleared, and
thereby enables the completion of the next job. Error that may
occur include a paper feed, an jammed original, a copy jam, the
machine runs out of hard disk space, etc. Once the current job is
cleared, jobs that can be continued are limited to those that only
use parts of the machine not affected by the error.
Set the value in the range 4 to 99 minutes, in 1 minute
increments. Select
Off
if you do not want to use this feature.
1. From the
Machine Clock/Timers
screen, select
Auto Job
Release
, and select
Change Settings
.
2. Select
Off
or
On
.
3. If you selected
On
, set the time by using the S , T , or the
numeric keypad to enter a numeric quantity.
4. Select
Save
to save the settings and return to the previous
window.