Xerox 4595 con Xerox FreeFlow DocuSP Print Controller-15553 - Manual (Page 24)

Xerox 4595 Copier/Printer System Administration Guide 1-12
1. Overview
Power on/off
Switch the power on before operating the machine. After the
power is on, the machine will take about 5 minutes to warm up
before you can start making copies.
Turn the machine off at the end of the day or when it is not in use
for a long period of time. Use the
Power Saving
feature when the
machine is not in use for a while to reduce power consumption.
KEY POINT:
Switching the machine power off may cause loss of
data being processed.
Refer to the Power Saver Mode section on the next page for more
information.
NOTE: If the power is off, all functions of the machine will stop.
Powering on
Open the cover and press the power switch to the [ | ] position to
turn the power on.
NOTE: The “Please wait...” message indicates that the machine is
warming up. The machine cannot be used while it is warming up.