Xerox 4595 con Xerox FreeFlow DocuSP Print Controller-15553 - Manual (Page 160)

Xerox 4595 Copier/Printer System Administration Guide 8-2
8. Setups
NOTE: If you are using the authentication feature, a password
may be required.
KEY POINT:
It is recommended that you change the system
administrator UserID and password immediately after installing
the machine. For information about the setting, refer to
System Administrator Settings page 174
.
3. Select
Confirm
.
NOTE: The default UserID value is 11111. When using the
Authentication feature, a password is required. The default
password value is x-admin.
4. From System Administrator Menu, select
System Settings
.
•
User Mode:
While still in System Administration mode,
you can still carry out normal operations such as copying
and scanning.
NOTE: To exit a mode entered from User Mode, press the
Log In/Out button, and then from the Log In screen,
select Cancel.
•
System Settings:
You can set or register the system
settings.