Xerox 4595 con Xerox FreeFlow DocuSP Print Controller-15553 - Manual (Page 287)

Xerox 4595 Copier/Printer System Administration Guide 8-129
8. Setups
NOTE 2: If the user ID information cannot be acquired, the words
"Unknown User" are printed.
Banner Sheet
Select whether or not the banner sheets will be used to separate
different output jobs. Select one of the following:
•
Off:
Do not print banner sheets.
•
Start Sheet:
Print a banner sheet
before
a print job.
•
End Sheet:
Print a banner sheet
after
a print job.
•
Start Sheet & End sheet:
Print a banner sheet both
before
and after
a print job.
NOTE 1: Even if the stapler feature is enabled, banner sheets are
not stapled.
NOTE 2: On a print job from a Macintosh, the document name
does not appear on the banner sheet.
NOTE 3: When printing banner sheets, they are counted for
metering purposes.
Banner Sheet Tray
Select the paper tray from which the banner sheets are
printed. Select one of the following trays:
1
,
2
,
3
,
4
, or optional
6
and
7
.
PostScript Paper Supply
Select whether or not to enable the PostScript DMS (Deferred
Media Selection) feature. Select either
Auto
or
Select Paper
Tray
.
PostScript Font Absence
Select how the machine will handle a specified PostScript font that
is not loaded on the machine.
•
Cancel Printing: This selection cancels the job without printing
it.
•
Substitute Font and Print:
This selection continues printing
the job and uses a substitute font in place of the missing font.
PostScript Font
Substitution
When a PostScript font specified in a job is not present, select
whether or not to use ATCx for the substitute font.