Xerox 4595 con Xerox FreeFlow DocuSP Print Controller-15553 - Manual (Page 221)

Xerox 4595 Copier/Printer System Administration Guide 8-63
8. Setups
Use the following procedure to access the
Other Settings
feature.
1. From the
Common Settings
screen, select
Other Settings
.
2. Select the item to be set or changed, and select
Change
Settings
.
NOTE: Select
S
to display the previous screen and select
T
to display the next screen.
3. Select the default setting.
4. Select
Save
; you are returned to the
Other Settings
screen.
5. Repeat Steps 1-4 for the selecting the default setting for any
additional desired
Other Settings
items.
6. Select
Close
to return to the
Common Settings
screen.
7. Select Close to return to the
System Settings
screen.
Auto Job Promotion
This
Other Settings
option allows you set the machine to
automatically promote a job for printing/copying if the machine is
unable to start a prior job. For example, the machine is unable to
start an operation because there is no paper in the tray (at the
start of a copy or print operation). If this feature is enabled, then
the machine can bypass the current job and allows other jobs to
start.
KEY POINT:
The other jobs must not have the same copy/print
requirements as the faulted job. If other jobs have different copy/
print requirements, then these other jobs can be promoted and
copied/printed.
NOTE: Stored documents such as secure prints and sample prints
are excluded and cannot be automatically promoted.