Xerox 4595 con Xerox FreeFlow DocuSP Print Controller-15553 - Manual (Page 262)

Xerox 4595 Copier/Printer System Administration Guide 8-104
8. Setups
Memory Full Procedure
While scanning/copying an original, if there is insufficient space on
the machine’s hard disk, a screen appears. This screen asks the
user how to handle the partially stored data. If the user does not
respond to this screen and a predetermined amount of time
elapses, then the machine will either cancel the job or run the
partially scanned-in/copied job. The setting selected here
determines how the machine will handle that partially scanned-in/
copied job.
•
Cancel Job:
The stored data is deleted from the machine’s
hard disk.
•
Run Job:
The scanned-in/copied data is treated as valid and
complete, and the job printed as is.
You can set amount of time that elapses between an error
occurring and the machine’s handling of the partially scanned-in/
copied job. For more information, refer to Auto Job Release page
22.
Maximum Stored Pages
Set the default maximum number of pages stored for a copy
original. You can set a number between
1
-
2000
pages.
2 Sided Original Scan
Options
Select the default setting that affects the scan method of 2-sided
originals. Select either
2 Sided Simultaneous Scan
or
1 Sided
Scan
.
Auto Paper Off
Select the default tray that will be used when the
Auto
feature (on
the
Paper Supply
,
Basic Copying
screen) is canceled because
the
Auto%
or the
Independent X-Y%
feature (on the
Reduce/
Enlarge
,
Basic Copying
screen) is selected. Select from
Trays
1-4
or optional
Trays 6-7
.
Fine-tune 100%
The fine-tune value is applied to documents that are placed on the
Document Glass for copying and the either
100%
for Basic
Copying (Reduce/Enlarge) or
Preset%
,
100%
is selected. Set the
value in the X/Y direction within the range 98 to 102% in 0.1%
increments.
KEY POINT:
This feature is not applied if any other Reduce/
Enlarge percentage is selected.