Xerox 4595 con Xerox FreeFlow DocuSP Print Controller-15553 - Manual (Page 205)

Xerox 4595 Copier/Printer System Administration Guide 8-47
8. Setups
2. Select the item to be set or changed, and select
Change
Settings
.
3. Select a
Priority
setting (
First
-
Sixth
) and assign a specific
tray to that priority setting.
NOTE: Only one tray can be set to each priority.
4. Select
Save
to save the selections and return to the Paper
Tray Priority screen.
5. Select Close to return to the Paper Tray Settings screen.
Paper Type Priority
Set the paper type priority sequence for automatic tray selection.
Automatic tray selection means that a tray containing the
appropriate paper is automatically selected by the machine for
copying or printing.
You can select from a variety of paper types including bond paper,
plain paper, recycled paper, side 2 paper, etc.
NOTE 1: The paper type selections for this feature will vary
depending on your machine and your work environment
requirements (such as the types of paper you use most
frequently).
NOTE 2: The paper type setting takes precedence over the tray
priority sequence. If different paper types appear in the same
priority sequence, the paper selection is determined by tray
priority sequence.
For information about the tray priority sequence, refer to Paper
Tray Priority page 46.