Xerox 4595 con Xerox FreeFlow DocuSP Print Controller-15553 - Manual (Page 38)

Xerox 4595 Copier/Printer System Administration Guide 2-4
2. Configuration
Configuration on the computer
This section describes the configuration procedure for the
computer.
To print from the machine, the computer needs to have the print
driver installed.
For information about the usable operating systems, refer to
“Supported operating systems” on page 1-7.
Refer to the manual contained in the “CentreWare Utilities”
CD-ROM for the print driver installation procedure.
To print from a Macintosh using TCP/IP (LPD), refer to the manual
contained in the CD-ROM included with this product for the print
driver installation procedure.
NetWare
Preparations
The following items are required when using NetWare network:
•
A NetWare server.
• The "CentreWare Utilities" CD-ROM which is included with this
product.
Configuration procedure
Overview
The machine supports PServer mode for both the NetWare
Directory Service and Bindery Service. PServer mode enables the
machine to function as a print server and to capture print jobs in
the print queue to output. The printer created for the machine
consumes one file server license.
NOTE: The machine does not support Remote Printer (RPrinter)
Mode.
Supported interfaces
• 100Base-TX
• 10Base-T
Supported frame types
• Ethernet II specification
• IEEE802.3 specification
• IEEE802.3 / IEEE802.2 specification