Xerox 4595 con Xerox FreeFlow DocuSP Print Controller-15553 User Manual
Page 29
Xerox 4595 Copier/Printer System Administration Guide
1-17
1. Overview
6.
Select
Machine Clock /Timers
.
7.
Select
Auto Power Saver
, and select
Change Settings
.
8.
Using the up/down arrow buttons, configure a power saver
mode migration time from 1 to 240 minutes, in 1 minute
increments.
•
From Last Selection to Low Power Mode:
Set the time
to move to the
Low Power Mode
after the last operation.
NOTE: The default for From Last Selection to Low
Power Mode is 15 minutes.
This manual is related to the following products:
- 4595 con Xerox FreeFlow DocuSP Print Controller-14450 4595 con integrated Copy-Print Server-15547 4595 con Xerox FreeFlow DocuSP Print Controller-15870 4595 con integrated Copy-Print Server-15243 4595 con integrated Copy-Print Server-14444 4595 con integrated Copy-Print Server-15864 4595 con Xerox FreeFlow DocuSP Print Controller-15249 4595 mit integrated Copy-Print Server-9394 4595 mit integrated Copy-Print Server-10919 4595 mit Xerox FreeFlow DocuSP Print Controller-10926 4595 mit Xerox FreeFlow DocuSP Print Controller-9700 4595 mit integrated Copy-Print Server-10082 4595 mit Xerox FreeFlow DocuSP Print Controller-9401 4595 mit integrated Copy-Print Server-9693 4595 mit Xerox FreeFlow DocuSP Print Controller-10089 4595 con Xerox FreeFlow DocuSP Print Controller-17520 4595 con Xerox FreeFlow DocuSP Print Controller-18220 4595 con integrated Copy-Print Server-18213 4595 con integrated Copy-Print Server-17819 4595 con Xerox FreeFlow DocuSP Print Controller-17826 4595 con integrated Copy-Print Server-17513