Xerox 4595 con Xerox FreeFlow DocuSP Print Controller-15553 - Manual (Page 59)

Xerox 4595 Copier/Printer System Administration Guide 3-11
3. Using CentreWare Internet Services
9. Set the
Poling Interval
.
10. Set the
Number of Searches
.
11. Set the
Password
.
a. Enter the
Password
.
b. Re-enter the same password in the
Re-enter Password
field.
12. Select the
Enable
check box to enable the
TBCP Filter
.
NOTE: The TBCP Filter checkbox will have a checkmark in it
indicating that the TBCP Filter is enabled.
13. Set the
Tree Name
.
14. Set the
Context Name
.
NOTE: Set this item only when the operation mode is in
Directory Service.
15. Select a frame type from the
Transport Protocol - Frame
Type
pull-down menu.
NOTE: Set this item only when the operation mode is in
Directory Service.
16. Select the
Enable
check box to enable
SLP - Active
Discovery
.
17. Reflect the values as the machine's setting values.
a. Click the
Apply New Settings
. A screen to enter the user
name and password will be displayed.
b. Enter the System Administrator UserID and password into
User Name
and
Password
, and then click
OK
.
NOTE: The default User ID value is 11111 and password is
x-admin.
c. The right frame on the web browser will change to the
machine reboot display.
d. Click
Reboot
. The machine will reboot and the setting
value will be reflected.