Xerox 4595 con Xerox FreeFlow DocuSP Print Controller-15553 - Manual (Page 334)

Xerox 4595 Copier/Printer System Administration Guide 8-176
8. Setups
System Administrator Password
Set the password for System Administration mode.
KEY POINT:
This is recommended for stronger security.
NOTE: The default setting of the system administrator password
is x-admin.
The
System Administrator Password
appears in the
Login
Setup/Auditron Administration
operation after
Yes
is selected
for using a password. Set the password after setting the system
administrator UserID. The password can be from 4-12 numeric
digits.
For more about enabling and disabling passwords, refer to Login
Setup/Auditron Administration page 178.
1. Select
System Administrator Password
.
2. Select
Keypad
.
3. Select
Keyboard
to enter the new password from 4-12
numeric digits in
New Password
, and select
Next
.
4. In
Re-enter Password
, enter the same password, and select
Save
.
NOTE: To set no password, leave the password blank, and
select Save.