Xerox 4595 con Xerox FreeFlow DocuSP Print Controller-15553 - Manual (Page 331)

Xerox 4595 Copier/Printer System Administration Guide 8-173
8. Setups
shown as the item name. Input any information as an auxiliary
item, but only with a maximum of sixty characters. This is
appropriate for information represented by a longer character
string, such as company division or address and so forth. For
more about attribute name, refer to Attribute Name of Custom
Items 1 to 3 page 147.
Transfer Protocol
Set the forwarding destination protocol. Select either
FTP
or
SMB
.
Server Name/IP address
Enter the recipient server name or IP address for transmission
destination.
Shared Name (SMB Only)
Enter the shared name set for the SMB folder. Enter with the UNC
format.
KEY POINT:
Do not start shared names with a backslash (/). If
they start with a backslash (/), the machine will not identify them
when processing job flows.
Save in
Enter the directory for storing documents.
•
Forwarding via FTP
Example: To save the aaa directory located in the root
directory when you log in into the bbb directory (aaa/bbb).
• Forwarding via SMB
Example: To save the aaa directory with a specified volume
(UNC format) in to the bbb directory (aaa\bbb).
Login Name
When a login name is required to be input by the forwarding
destination server, set the login name. For the login name, you
can enter a maximum of 32 characters.
Password
When a password is required to be input by the forwarding
destination server, set the password. For the password, you can
enter a maximum of 32 characters.
Port Number
Set the forwarding destination port number. Input a number in the
range 1 to 65535.
When the Delete All
Settings button is selected
This deletes all registered information for the selected address
book entry. To delete all registered information for the selected
address book entry, select
Yes
.
KEY POINT:
Deleted information cannot be recovered.