Xerox 4595 con Xerox FreeFlow DocuSP Print Controller-15553 - Manual (Page 270)

Xerox 4595 Copier/Printer System Administration Guide 8-112
8. Setups
Original Size Defaults
Select the default original sizes. Selections made here appear on
Original Size
feature (
Scan Options
tab/
Copy
screen). Assign
an original size to each of the eleven buttons;
Auto Size Detect
cannot be selected.
You can also use this feature for assigning nonstandard paper
sizes. This is advantageous when you are frequently copying
nonstandard size originals. By presetting a nonstandard size, it is
not necessary to enter the original size each time a copy is made.
Use the following procedure for assigning default original sizes to
the eleven buttons.
1. From the
Copy Mode Settings
screen, select
Original Size
Defaults
.
2. Select the item to be set or changed, and select
Change
Settings
.
NOTE: Select s to display the previous screen and select t to
display the next screen.
3. Select the item to be changed.
4. Select the desired setting for that item and select
Save
.
5. Repeat Steps 1-4 for all eleven options.