Xerox 4595 con Xerox FreeFlow DocuSP Print Controller-15553 - Manual (Page 243)

Xerox 4595 Copier/Printer System Administration Guide 8-85
8. Setups
Reduce/Enlarge
Select the default setting for
Reduce/Enlarge
feature on the
Basic Copying
screen. Select one of the following magnification
levels as your default R/E option.
The selection made here appears as the default setting on the
Basic Copying
tab (
Copy
feature); refer to the below illustration:
KEY POINT:
If the default value for the
Reduce/Enlarge
feature
is set to
Auto%
, then you cannot select the
Auto
option as the
default setting for
Paper Supply
(refer to is page 84).
For information about R/E Preset buttons, refer to Reduce/Enlarge
Presets page 114.