Xerox 4595 con Xerox FreeFlow DocuSP Print Controller-15553 - Manual (Page 267)

Xerox 4595 Copier/Printer System Administration Guide 8-109
8. Setups
Stamp Position- Bottom
Right
This feature allows you to fine tune exactly where on the bottom
right of the output that your stamp is printed. The selection made
here becomes the default setting when
Bottom Right
is selected
for the
Stamp Position
on the
Annotation
screen (
Output
Format
tab).
Set the position in the horizontal direction within the range
0-100
and in the vertical position within the range
0-100
in 1 mm
increments.
Date Position defaults
You can select the default position that the date is printed on the
output when the
Date - Position
feature is selected on the
Annotation
screen (
Output Format
tab). There are six date
position defaults:
•
Date Position - Top Left
• Date Position - Top Center
• Date Position - Top Right
• Date Position - Bottom Left
• Date Position - Bottom Center
• Date Position - Bottom Right
Date Position-Top Left
When selecting
Top Left
under
Annotation - Date - Position
in
the
Output Format
screen for printing, you can finely tune the
date position.
Set the position in the horizontal direction within the range
0-100
and in the vertical position within the range
0-100
in 1 mm
increments.
Date Position-Top Center
When selecting
Top Center
under
Annotation - Date - Position
in the
Output Format
screen for printing, you can finely tune the
date position.
Set the position in the horizontal direction within the range
0-100
and in the vertical position within the range
0-200
in 1 mm
increments.
Date Position-Top Right
When selecting
Top Right
under
Annotation - Date - Position
in
the
Output Format
screen for printing, you can finely tune the
date position.
Set the position in the horizontal direction within the range
0-100
and in the vertical position within the range
0-100
in 1 mm
increments.