Xerox 4595 con Xerox FreeFlow DocuSP Print Controller-15553 - Manual (Page 261)

Xerox 4595 Copier/Printer System Administration Guide 8-103
8. Setups
Copy Control
The options here allow you to select the default settings that relate
to the copy operation, such as
Auto Paper
,
Original Type
,
Output Orientation
, and many more. To select the default
settings for the various
Copy Control
options, perform the
following steps:
1. From the
Copy Mode Settings
screen, select
Copy Control
.
2. Select a
Copy Control
item to be set or changed, and select
Change Settings
.
NOTE 1: Select s to display the previous screen and select t to
display the next screen.
NOTE 2: Each of the items shown in the above illustration is
discussed on the following pages.
3. Select the desired setting for that item.
4. Select
Save
; you are returned to the
Copy Control
screen.
5. Repeat Steps 1-4 until you have selected the desired setting
for each
Copy Control
item.
6. Select
Close
to return to the
Copy Mode Settings
screen.