Xerox 4595 con Xerox FreeFlow DocuSP Print Controller-15553 - Manual (Page 231)

Xerox 4595 Copier/Printer System Administration Guide 8-73
8. Setups
Service Representative Restricted Operation
KEY POINT:
While this feature may still be selectable, it is no
longer functional nor supported.
Software Download
KEY POINT:
This feature is not supported; however, it may still be
accessible. This feature is
only
for service representative use.
Contact the Customer Support Center. Select
Disabled
as the
default setting.
Document Feeder Tray Elevation
Select the default setting for when the elevator tray raises on the
document feeder:
When loading originals
Select this option if you want the elevator tray to raise when you
load documents in the document feeder.
When pressing Start
Select this option if you want the document feeder elevator tray to
raise when you press the
Start
button on the control panel.
Estimated Time for Single or All Jobs
Select the default setting that is displayed for the estimated job
completion time.
Cumulative time for all jobs
Select this option if you want the machine to display the total time
for all jobs.
Time required for a single
job
Select this option if you want the machine to display the time
required for a single job.