Konica Minolta eCopy - Manual (Page 215)

eCopy ShareScan OP Installation and Setup Guide | 207
Firewall and switch worksheet
Certain TCP ports must be open for communication between the devices on the network. You can
open the required ports (on switches, routers, or firewalls) between specific devices; you do not
need to open a required port to all devices on the network.
Copy and complete the worksheet for each router, switch, firewall, or multi-homed PC that could
affect communication.
Item Description Firewall or
other device Example
Manufacturer Cisco
Model
Location 2-C22
9030, 9100 Must be open for communication between the
Services Manager and eCopy-enabled devices. Open
8899, 9988
on multicast
IP address
239.254.5.6
1
1
239.254.5.6 is an administratively scoped Class D IP address. It is used so that the packets are contained within the
network. The multicast source relies on multicast-enabled routers to forward the packets.
Optional, for encrypted UDP communication between
the Services Manager and eCopy-enabled devices. Open
8888, 9999
on multicast
IP address
239.254.5.6 Required, if you are using the eCopy Inbox Agent
with Scan to eCopy Desktop.
Optional, if you want unencrypted UDP
communication between eCopy Inbox Agent, Services
Manager, and eCopy Desktop clients.
Open
9200 - 9250 Used internally on PCs where the Services Manager is
running. No special configuration is required. Default
9010, 9101 Used for communication between the ShareScan OP
Administration console and the eCopy Agent service.
7125 Used internally on PCs where the Services Manager is
running.