Konica Minolta eCopy - Manual (Page 104)

96 | Configuring connectors
eCopy Connector for SMTP using LDAP
The eCopy Connector for SMTP using LDAP enables users to send scanned documents from an
eCopy-enabled device as e-mail attachments using an SMTP server on the network. When sending
e-mail from a personal account, the system prompts users to log on to validate their identity. The
Global Address List is provided by an LDAP server.
Configuring the LDAP/SMTP connector can be complex if you are unfamiliar with LDAP and
SMTP. eCopy provides a Connector Wizard to walk you through the basic setup of this connector.
If your situation requires more complex settings, or if you need to change any of the settings from
the configuration that you originally set up using the Wizard, you can do so using the Properties
window.
To configure the eCopy Connector for SMTP using LDAP:
1 In the console tree, click LDAP/SMTP > Properties .
2 On the Display tab, specify the Image and Label settings (see “Configuring the Display
settings” on page 63).
3 Select the Configure tab.
The Configure tab displays a summary of the LDAP and SMTP settings that you specify using
the Wizard or the Properties window.
Use the connector Wizard to specify the basic connector settings (see “eCopy connector for
SMTP using LDAP Wizard settings” on page 98).
or
Click Properties to specify custom settings.